Creating Synergistic Solutions Through Innovation.

Eternity Sales, Inc.    
     
Home Manufacturers Products Services About ESI Contact ESI Synergy Store
ESI Kessler Ellis Kepware Triangle Research Westermo   Other Mfgs.
Nano-10 F-Series FMD Series Peripherals Software Download  
     

F-Series Embedded Ethernet PLC

Fx1616-BA Fx2424 SmartTILE-Fx
   
F1616-BA
F1616-BA
   
Features Include:
  • Digital Inputs: 16 @ 24 VDC (NPN)
  • Digital Outputs: 16 ( 12 @ 5 amp relay, 4 @ 8 amp NPN (Peak Current)
  • Expandable to 128 Digital Inputs / 128 Digital Outputs
  • Analog Inputs: 8 @ 0-5 VDC (12 Bit Resolution)
  • Analog Outputs: 4 @ 0-5 VDC (10 Bit Resolution)
  • 4 x PWM 4 amp @24VDC (continuous frequencies, 0.1% duty cycle resolution)
  • Stepper Motor Control - 2 (10,000 pps)
  • High Speed Counter: 3 @ 4 KHz
  • 1 - RS232 Port
  • 2 - RS485 port (2 wire)
  • 1 - Ethernet Port
  • 1 - IR Remote Control
  • 4 - Light Dimmer Controls
  • Program Flash Memory: 23.5K words.
  • Non-Volatile Memory: 6K words built in
  • Dimensions: 7.05” x 4.45” x 1.0”
  • Operating Temperature: 0-70C
Starting with the control I/Os, the Fx1616-BA has built-in 32 digital I/Os (expandable to 256) that interface directly to 24VAC or DC power, 8 analog inputs and 4 analog outputs that are 0 to 10V range. Among the I/Os are 4 DC outputs that can also be used as PWM or AC phase control (light dimmer type) outputs, or to drive stepper motor(s). Also, there are 3 high-speed encoder inputs, 6 incoming pulse frequency counter inputs, as well as a built-in Infrared remote control interface. Unlike other product makes, these incredible features come in the standard package at no additional cost to the buyer/user.

More importantly, the Fx1616-BA's immense communication capability allows it to be used either as the master controller of a simple project such as in home automation, or as one of hundreds of "node controllers" in a complex buildng project. The built-in Ethernet port on the Fx1616-BA PLC hosts both a PLC web server and a Modbus/TCP server, allowing up to 6 simultaneous connections with devices such as touch panel HMIs), hardware running SCADA and PC software or other node controllers. The controller is also able to send out emails, create a report on its file system and upload to an FTP server, or check a specified website to retrieve dynamic contents. More standard interfaces on the PLC include one RS232 port and two RS485 ports, all of which support industry standard MODBUS RTU or ASCII protocols. A special set of interface pins is even provided on the PLC to allow addition of a third-party radio module known as XBEE which in turn enables this controller to interface to futuristic ZIGBEE wireless sensors and control modules.

Just as notable is Triangle Research's proven i-TRiLOGI "Ladder+BASIC" programming software which makes complex programming of the F-Series PLCs a whole lot easier than with standard ladder-logic programming! By combining the Ladder Logic program with a floating-point math-capable BASIC language (i-TRiLOGI version 7), this great controller is packaged to be ready immediately to interface to power meters, HVAC sensors, and/or talk to other controllers to carry out sophisticated control tasks in a commercial building project.

Some Building Automation applications for this PLC include roles as Main HVAC controller, Slave HVAC controller for VAV or CAV boxes, Lighting control and Audio-Video (AV) equipment control (learn and send 38KHz IR remote signal).

The Fx1616-BA replaces the previous F1616-BA as it now supports the floating-point math and variables available on i-TRiLOGI version 7. It is 100% backwards compatible to F1616-BA.

   
Downloads:  
 
   
Part Number Description List Price (1 pc) Purchase
Fx1616-BA 16 in / 16 out, 8 analog in / 4 analog out, RS485, Ethernet $429.00
ISTK-Fx1616-BA Fx1616-BA Starter Kit (Controller, iTrilogi Programming Software, USB to RS485 Converter, U-485 Driver $499.00
EXP-1616R Expansion - 16 (Opto-isolated, 24V NPN/PNP or 16 AC inputs.) 16 (5A @ 24V DC or 120VAC or 2A @ 250V AC) $185.00
EXP-2424 Expansion - 24 (Opto-isolated, 24V NPN/PNP or 16 AC inputs.) 24 (5A @ 24V DC or 120VAC or 2A @ 250V AC) $185.00
EXP-4040 Expansion - 40 (24x NPN @ 24VDC, 16x 5V HCMOS) 40 (24x 1A @ 24V DC, 16x 5V HCMOS) $195.00
I-7017 8-ch RS485 16 bit Analog Inputs $249.00
I-7018 8-ch, RS485 16 bit Thermocouple $259.00
I-7022 2 ch, RS485 12 bit Isolated Analog Ouputs $289.00
I-7024 4 ch, RS485 14 bit Analog Outputs $339.00
AN20MA-2 Analog Output Converter (0-5 VDC to 0-20 mA) $99.00
AIO-TERM-1/DB15 Analog I/O Converter (0-5 VDC to 0-20 mA) Includes DB-15 analog cable $70.00
DINKIT-2 Din Rail Kit for F1616-BA $14.00
 Contact ESI to assist in specifying product and for quantity pricing.
   
F2424
Fx2424
   
Features Include:
  • Digital Inputs: 24 @ 24 VDC (NPN)
  • Digital Outputs: 24 ( 12 @ 8 amp NPN, 12 @ 1 amp NPN (Peak Current)
  • Expandable to 128 Digital Inputs / 128 Digital Outputs
  • Analog Inputs: 8 @ 0-5 VDC (12 Bit Resolution)
  • Analog Outputs: 4 @ 0-5 VDC (10 Bit Resolution)
  • 4 x PWM @ 4 amp / 24VDC (continuous frequencies, 0.1% duty cycle resolution)
  • Stepper Motor Control - 3 (10,000 pps)
  • Stepper Motor Drivers: 3 (unipolar)
  • High Speed Counter: 3 @ 10 KHz
  • 1 - RS232 Port
  • 2 - RS485 port (2 wire)
  • 1 - Ethernet Port
  • IR Remote Control: 1
  • Light Dimmer Control: 12
  • Program Flash Memory: 23.5K words.
  • Non-Volatile Memory: 6K words built in
  • Dimensions: 7.05” x 4.45” x 1.0”
  • Operating Temperature: 0-70C
The Fx2424 PLC has 24 digital inputs, 24 digital outputs and 12 analog I/Os built-in and is expandable up to 256 digital I/Os. It is capable of controlling and/or driving up to 3 stepper motors directly with up to 4A per phase @24VDC. Its high speed digital inputs allow up to 3 quadrature encoders which may be connected to provide both position and speed information of moving devices.

With 1 RS232 port and 2 RS485 ports and all of them supporting Modbus ASCII/RTU protocols, the Fx2424 is fully equipped for connectivity to a whole range of peripheral devices. Furthermore, each Fx2424 comes equipped with an IR remote control receiver for contactless data entry, and supports an optional ZigBee wireless radio module - XBee supplied by Digi International Inc.

Just as notable is Triangle Research's proven i-TRiLOGI "Ladder+BASIC" programming software which makes complex programming of the Fx2424 PLC a whole lot easier than with standard ladder-logic programming! By combining the Ladder Logic program with a floating-point math-capable BASIC langugage (i-TRiLOGI version 7), this great controller is packaged to be ready immediately to interface to power meters, HVAC sensors, and/or talk to other other controllers to carry out sophisticated control tasks in a commercial building project.

This highly flexible product is certainly poised for applications in factory, home and building automation. The Fx2424 PLC price-to-performance profile is positioned as much for the mid to high-end OEM machine builder and factory/plant system integrators as it is for the building automation designer. For the user who needs the integrated features and connectivity of a PLC, the Fx2424 is the perfect choice.

Fx2424 replaces the previous F2424 as it now supports the floating-point math and variables available on i-TRiLOGI version 7. It is 100% backwards compatible to F2424 PLCs.

   
Downloads:  
 
   
Part Number Description List Price (1 pc) Purchase
Fx2424 24 in / 24 out, 8 analog in / 4 analog out, RS485, Ethernet $429.00
ISTK-Fx2424 Fx2424 Starter Kit (Controller, iTrilogi Programming Software, USB to RS485 Converter, U-485 Driver $499.00
EXP-1616R Expansion - 16 (Opto-isolated, 24V NPN/PNP or 16 AC inputs.) 16 (5A @ 24V DC or 120VAC or 2A @ 250V AC) $185.00
EXP-2424 Expansion - 24 (Opto-isolated, 24V NPN/PNP or 16 AC inputs.) 24 (5A @ 24V DC or 120VAC or 2A @ 250V AC) $185.00
EXP-4040 Expansion - 40 (24x NPN @ 24VDC, 16x 5V HCMOS) 40 (24x 1A @ 24V DC, 16x 5V HCMOS) $195.00
I-7017 8-ch RS485 16 bit Analog Inputs $249.00
I-7018 8-ch, RS485 16 bit Thermocouple $259.00
I-7022 2 ch, RS485 12 bit Isolated Analog Ouputs $289.00
I-7024 4 ch, RS485 14 bit Analog Outputs $339.00
AN20MA-2 Analog Output Converter (0-5 VDC to 0-20 mA) $99.00
AIO-TERM-1/DB15 Analog I/O Converter (0-5 VDC to 0-20 mA) Includes DB-15 analog cable $70.00
DINKIT-2 Din Rail Kit for F2424 $14.00
 Contact ESI to assist in specifying product and for quantity pricing.
   
SmartTILE-Fx
SmartTILE-Fx
Features Include:
  • Digital Inputs: 16 @ 24 VDC (NPN)
  • Digital Outputs: 16 ( 12 @ 5 amp relay, 4 @ 8 amp NPN (Peak Current)
  • Expandable to 128 Digital Inputs / 128 Digital Outputs
  • Analog Inputs: 8 @ 0-5 VDC (12 Bit Resolution)
  • Analog Outputs: 4 @ 0-5 VDC (10 Bit Resolution)
  • 4 (1Hz to 50KHz / 0.00% to 100.00%)
  • Stepper Motor Control - 3 (pulse & direction output per channel. Up to 10,000 pps)
  • Stepper Motor Drivers - 3 (4 unipolar outputs per channel, up to 10,000 pps)
  • High Speed Counter: 3 @ 10 KHz
  • I2C - (Master Only)
  • UART - 3
  • 1 - Ethernet Port
  • 1 - IR Remote Control
  • 12 - Light Dimmer Controls
  • Program Flash Memory: 23.5K words.
  • Non-Volatile Memory: 6K words built in
  • Operating Temperature: -20 to 85C
The SmartTILE-Fx integrates a 32-bit CPU, FRAM & flash memory, battery-backed Real Time Clock and an Ethernet port on board. Its digital, analog and serial I/O signals are brought to OEM's carrier board via 3 sets of header pins.

Since all critical components are already built-in on board, An OEM only needs to design a simple carrier PCB that contains digital and analog circuit that interface the low voltage signals on the SmartTILE to the real world voltages and currents (could be 24V, 120V or 240V). The SmartTILE-Fx provides 16 digital inputs, 16 digital outputs (5V CMOS logic level), 8 analog inputs and 4 analog outputs (12-bit, 0-5V) and can be expanded to 128 digital inputs and 128 digital outputs.

SmartTILE-Fx provides 3 channels of serial ports (3.3V, Tx, Rx & /RTS) that can interface to RS232, RS485 or even wireless radio. An I2C port (3.3V) is also available, allowing OEM to interface to specialty ICs that support I2C bus.

Programmable using the highly acclaimed i-TRiLOGI
Ladder Logc+BASIC programming software that combines Ladder Logic with a floating point math capable BASIC language, OEM can accomplish complex programming in a fraction of time of those pure ladder-only, or C-programmable only platforms.

   
Downloads:  
 
   
Part Number Description List Price (1 pc) Purchase
DEV-STILE-Fx1616 SmartTILE-Fx development package, includes Fx1616-BA $698.00
DEV-STILE-Fx2424 SmartTILE-Fx development package, includes Fx2424 $698.00
   
Part Number Description Qty. (Boxes) Price / Unit Price / Box
STILE-Fx-12Pak SmartTILE (package of 12 / box) 1 - 9 $195.00 $2,340.00
STILE-Fx-12Pak SmartTILE (package of 12 / box) 10 - 49 $159.00 $1,908.00
STILE-Fx-12Pak SmartTILE (package of 12 / box) 50 - 99 $139.00 $1,668.00
STILE-Fx-12Pak SmartTILE (package of 12 / box) 100 + $119.00 $1,428.00
Contact ESI regarding your intent on purchasing the SmartTILE-Fx in quantity

 

Home Manufacturers Products Services About ESI Contact ESI Site Map

Store

Copyright 2016, Eternity Sales Inc.. All rights reserved.

ESI has received permission from the companies presented on this web site, to use information related to all product lines represented by ESI for the sole purpose of marketing their products.